Copper bar insulation process and application
Release time:
2024-05-23
Copper insulation can prevent the fault of the strong electric system in the machine room
Copper insulation can prevent the fault of the strong electric system in the machine room, raise the potential of the grounding point and damage the electronic components. Therefore, copper insulation must be done, so what are the copper insulation processes?
Main process of 1. copper bar insulation
1. Tin plating process
Tin plating on the surface of the copper bar can prevent oxidation of the copper bar and improve the contact surface of the copper bar connection. The metal tin and copper bonding layer will form an alloy, which enhances the adhesion of the copper bar coating. Metal tin has good conductivity, high compactness and cleanliness, and enhances the wear resistance of the plated parts. The process has short operation cycle and mature process, and is mostly used in the field of small electrical equipment and UPS room connection.
2. Spraying process
Spraying uses a special process and special equipment to evenly coat the powder coating on the copper bar, and then after curing, the copper bar forms a layer of flat, smooth and strong protective layer, so that the copper bar becomes a composite product.
Powder coating is a single synthetic resin or in the resin to join the modifier, curing agent, pigment and filler, after hot melt mixing, the solid block crushed into powder sieve made of thermosetting coating. The use of this process can maintain the original color of the copper bar, low cost, suitable for customers with small product thickness requirements, mostly used in power distribution cabinets, large conductive devices and so on.
Copper Bow
3. Insulation process of heat shrinkable tube
The heat shrinkable tube is mainly made of polyethylene material with excellent physical, chemical and electrical properties. It is mainly used for electrical insulation of connecting pieces, mechanical protection of solder joints, rust prevention and corrosion prevention, reduction of phase spacing, etc. It is mainly used to heat the heat shrinkable tube according to the characteristics that the heat shrinkable tube will shrink when heated. The temperature of the heat gun is about 400 ℃ ~ 600 ℃, so that the heat shrinkable tube covers the surface of the copper bar. The process is easy to operate, and heat shrinkable tubes with different properties can be selected according to customer requirements. They are mostly used in batteries and power distribution cabinets in electronics, communications, machinery and manufacturing industries.
The main application of 2. copper bar
The electrical conductivity of copper is better than that of aluminum, so it has been widely used in electrical equipment and complete sets of power distribution devices. Usually, the, B, C, N phase bus bars and PE bus bars in the power distribution cabinet are all copper bars. The copper bars are generally marked with phase color letters or coated with phase color paint during use. The A phase copper bars are marked with "yellow" color, B phase with "green" color, C phase with "red" color, N phase with "light blue" color, and PE bus bars with "yellow and green" double colors.
Copper bar is mainly used on primary lines such as zero line, high current phase line, ground line, etc., as well as the connection of primary components with large current on the electric cabinet. For example, a row of electric cabinets is connected between the cabinets with the main bus bar, and the main bus bar is divided into isolating switches, circuit breakers and other switches of each electric cabinet with branch bus bars. The copper bars include bare copper bars and tinned copper bars. In the electric cabinet, the joints of the copper bars are generally tinned and embossed or conductive paste is added. The spare parts are protected by heat shrinkable sleeves, and some are painted with insulating paint.
Recommend
Language