Xiamen BoFan Industry and Trade co. Ltd Official Website
Does the power conductive "copper-aluminum composite plate" deform when heated?
Release time:
2024-05-23
Copper aluminum composite plate is made of copper and aluminum two kinds of metal through a certain process of composite materials.
Copper aluminum composite plate is made of copper and aluminum two kinds of metal through a certain process of composite materials. Both copper and aluminum are metals, and metals usually undergo thermal expansion when heated, which is an inherent property of metal materials. Thermal expansion refers to a phenomenon in which the average distance between atoms increases when the temperature of an object increases, resulting in an increase in the volume of the object.
Specific to copper-aluminum composite panels, due to the different thermal expansion coefficients of copper and aluminum, their degree of expansion when heated will also be different. This different degree of expansion may lead to internal stresses in the composite plate, which may lead to deformation of the composite plate if these stresses exceed the bearing limit of the material.
In addition, the deformation of the copper-aluminum composite plate may also be affected by other factors, such as the thickness of the material, the manufacturing process, and the bonding strength of the composite interface. If these factors are insufficient or defective, it may also cause the composite panel to be more prone to deformation when heated. However, it should be noted that copper-aluminum composite plates are usually subjected to certain heat treatment and process control in practical applications to ensure that they have sufficient stability and reliability within the normal operating temperature range. Therefore, under normal conditions of use, the copper-aluminum composite plate is not deformed.
In summary, whether the copper-aluminum composite plate will deform when heated depends on many factors, including the thermal expansion coefficient of the material, the thickness of the material, the manufacturing process, and the bonding strength of the composite interface. In practical applications, our copper-aluminum composite materials of Sanxie Metal, through reasonable heat treatment and mature and reliable process control, avoid the risk of thermal deformation of copper-aluminum composite panels, and ensure its stability and reliability during use.
Previous article
Next article
Previous article
Next article
Recommend
Zip Code
361000
Address
No.8, Maluan Road, Xinglin, Jimei District, Xiamen City