Xiamen BoFan Industry and Trade co. Ltd Official Website

Rich experience in production and processing

Quality Management System

A process based management system approach has been adopted to help develop, implement and improve the effectiveness of the quality system and ensure customer centrality. BOFAN aims to preventproblemhs within the process sothat all output is accurate. Up-front preventive action is utilised totry to eliminate quality problems before they occur.

Quality Policy

BOFAN's established policy is to provide customers with Provide specification-made, "fit-for-purpose" productsand through the character ISO 9001:2015The quality assurance system is controlled. The policy implemented within Platinum Sail involves total quality management for each employee. We firmly believe that" Quality checks cannot be incorporated into the product"With this philosophy, the responsibility for quality lies Everyoneto achieve performance standards that meet customer requirements. The quality of our products and services comes from all functions of the organization. Teamwork and contribution. We constantly seek to improve, not only the methods, products and processes, but also the quality of services, procedures and relationships. We are committed to putting quality first, Total Quality-A Way of Life. In our business, The customer is God.We are absolutely committed Customer-centricWe will never forget that they are the lifeblood of our organization and the purpose of our existence. Top Management Team of BOFAN's Right Ensure that resources are well maintained and available, and that all policies, procedures, work instructions, flow charts and control plans related to the quality management system are communicated, understood, implemented as required, reviewed and Continuous improvement.

Quality Document

We provide additional quality documents and data according to customer specific requirements

Selection of raw materials

High purity guarantee for copper bar selection ≥ 99.5%

The main raw material of copper bar is pure copper. Before production, our purchasing department needs to inspect and select raw materials to ensure that their quality meets the requirements. At the same time, it is also necessary to prepare other auxiliary materials, such as preservatives, antioxidants, etc.

Material cutting

Before processing, the copper needs to be pre-cut.

The production department cuts the length and width of the raw material as required. Cutting is carried out with a cutting machine or laser cutting machine to ensure that the cut size is accurate.

Material punching

Hole processing is the most critical link in the production of copper bars

According to the requirements of the product, the punching master usually uses stamping, drilling and other technologies to process the copper bar. Punching is carried out with molds and punches to ensure that the punching position is accurate and the flatness of the hole is maintained. The quality of the hole processing directly affects the electrification and durability of the copper bar.

Material drawing

Wire drawing is an optional link in the production of copper bars.

We have professional wire drawing personnel to carry out wire drawing treatment, so that the copper bar has a smooth and beautiful outer surface. Through the wire drawing treatment, the decorative effect of the copper bar can be fully reflected, giving the copper plate a more advanced vision and improving the appearance and conductivity of the copper bar.

Material Bending

Usually need to use some specialized machines and tools to complete

According to the design requirements of the product, the bending master bends the copper bar. Bending can be carried out by hydraulic press or numerical control bending machine to ensure that the bending angle and bending radius meet the requirements of copper bar forming

Material Welding

The copper bars need to be joined, which requires welding.

The welding master will weld copper bars of different sizes or shapes to form the required products. Welding can be carried out by gas welding, electric welding and other methods to ensure that the welding is firm and reliable.

Material surface treatment

In order to protect the surface of the copper bar from oxidation, corrosion, etc.

Commonly used surface treatment methods include tin plating, silver plating, nickel plating, spray protective paint, etc. Among them, tin plating is the most common treatment method, which can improve the conductivity and oxidation resistance of the copper bar. Through our own electroplating factory, we achieve the purpose of efficient communication in electroplating treatment and production.

Quality Inspection

Professional inspection team responsible for factory inspection

In order to ensure the quality and stability of the copper bar, the inspection department will carry out strict quality inspection. Common detection methods include appearance detection, size measurement, electrical performance test, etc.

Packaging, storage and transportation

Professional packaging team responsible for this project

Packaging colleagues use plastic film, foam board, etc. to pack and transport copper bars to protect the surface of the product from damage. At the same time, they will pay special attention to the storage and transportation process of moisture, shock and other measures to ensure the integrity of the product.

Grinding

Surface and cylindrical grinding

For products that require strict tolerances, platinum sails have fully equipped grinding facilities, which are very suitable for in-house or subcontracting work

Design and development

3D computerized design and drawing services with AUTOCAD and SOLIDWORKS

Platinum Sail has a successful track record of working with customers to design, develop, manufacture and construct complete products using 3D AutoCAD software packages

TESTING AND INSPECTION

Internal and external detection

We provide rigorous performance, testing and inspection services using the latest equipment including laser and camera vision systems

Distribution and Logistics Services

Adapt to your needs

We can provide parcel delivery services in China or around the world according to your specific logistics needs

Automatic laser cutting and sheet metal

12kw laser

High-tech CNC bus machine

Busbar processing punching and shearing machine

Punching

Professional CNC busbar punch

In our CNC stamping center, we can stamp parts from single parts to large series. The punch can be used to create all the hole patterns required for the busbar, including edge treatment

Bending

Professional CNC bending machine

We bend copper and aluminum busbars to 200mm x 30mm on a horizontal bending machine. Thanks to the most advanced measurement technology in the bending prism, the angle can be bent accurately. The CNC controlled bending machine with a pressure of 56 tons can be used to quickly process smaller busbars and plates.

language

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

required

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

analyze

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

Feature

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

advertise

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.

Hotline

+86 18250775367

E-mail

office@xmbofan.com

Zip Code

361000

Address

No.8, Maluan Road, Xinglin, Jimei District, Xiamen City

SEO

Business License

Quote Immediately

Fill out the message form and leave your contact information. Our staff will contact you within 24 hours (weekdays)